Installed Server 2019 Standard. I skipped the enter key during installation and when I then tried to change the key to activate it, it failed. Seems others have had the same issue. If you enter the key during install it solves the issue. Others have said to just reinstall. From this site found an easier […]
|
||||||
|
Client tried to go into Group Policy manager and edit Default Domain Policy but got this error. Found on this site the solution
Client that their email provider only connects using TLS 1.1 and 1.2. In Windows 10 its enabled by default and will work fine. For Windows 7 you have to run/check 3 steps. First make sure a Windows Update is installed. You must have SP1 installed and then download the update. Likely its already […] Get the error: “The filename, directory name, or volume label syntax is incorrect” This article explains options. The 3rd option is one needed if you don’t want to connect all the backup drives at once or cannot:
Add a new disk to the backup schedule by running the wbadmin command from an elevated command […] Had this in a few clients. Seems there is a Sharepoint update that causes it to stop working. From this website found the solution. 1. Open an Administrative command prompt (task manager, show all processes, file -> run). 2. Change directory to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN 3. Run PSConfig.exe -cmd upgrade -inplace b2b […] All my servers I build have RAID. Mostly RAID 1. My main multimedia machine at home has 5 drives. 4 of them are set to RAID 1. Well one of these drives died recently. The 8 year old drive (almost to the day) on one of my RAID 1 sets is dead. I […] For Windows 10 Found this at the following post. Basically follow these steps: Right-click the Windows Start Menu. Choose Command Prompt (Admin). Type this command and press ENTER: bcdedit /set {current} safeboot minimal Restart the computer and enter BIOS Setup (the key to press varies between systems). Change the SATA Operation mode to AHCI from […] Client PC will start the Automatic Repair on boot, fails and then restarts and does it again. From this link describes how to stop the automatic repair. Basically you need to a elevated command prompt and type the following: bcdedit /set {default} recoveryenabled No Reboot and then it might give you […] For Windows 7 and 2008R2 (Have not checked on Windows 10). When you run chkdsk /r on a drive it will use all the available memory. Thats fine if you are running Windows 7 and thats the only app you need running but on a Windows 2008R2 server and you need to run […] Client upgraded PCs to new with Windows 10. Issue is the ones with an HP LaserJet 401 printers the driver installed fine and it would print fine. After shutdown and with printer down and then start it up again it would not print. It would also load the built in USB driver disk […] |
|||||
|
Copyright © 2024 Steve the IT Tech Guy - All Rights Reserved Powered by WordPress & Atahualpa |
||||||
Recent Comments